The Dream Throttle System

Stock throttles lock you into a single pull rate, and the drag of a plain plastic tube on the bar takes constant maintenance. We have all broken a plastic housing. On drops it is easy for the throttle to jam, and for newer riders the power can be too much to handle.

We wanted a throttle that fixes all of it, so we teamed up with Trial 2 World Champion Sondre Haga to build the best throttle we could. Swap a cam and the same throttle goes from stock feel up to a 50% faster pull. Patented ZeroDrag bearings under your hand take the friction out of the turn with almost no maintenance. Billet construction takes a beating. PRO STOP means you never worry about a jammed throttle again, no matter the impact. And an optional limiter tames the pull for beginners.

The full package. The throttle we always wanted.

• Three interchangeable cams included, from stock feel up to a 50% faster pull
• Linear and progressive cam profiles to suit injected or carbureted bikes
• Patented ZeroDrag cartridge bearings sit directly beneath your hand for a frictionless feel
• PRO STOP safety: a cam tail contacts an internal cross bolt for a rock solid throttle stop that will not fail or jam, no matter the impact
• Optional limiter caps pull to a 1/4 turn, ideal for newer riders avoiding whiskey throttle
• Compatible with the stock Domino throttle tube
• Billet housing and cover in black or silver, mix and match
• 2 year crash warranty

• 1× billet throttle housing (black or silver)
• 1× billet housing cover (black or silver)
• 1× housing gasket and 1× titanium cover bolt
• 1× throttle tube with ZeroDrag bearings
• 1× throttle tube bushing and 1× bearing supported pulley wheel
• 1× throttle limiter / PRO STOP through bolt and 2× housing bolts
• 3× interchangeable throttle cams (Small or Large set)

• CNC machined billet aluminium housing and cover
• Billet throttle tube riding on patented ZeroDrag sealed cartridge bearings
• Bearing supported pulley wheel with low friction tube bushing
• Titanium cover bolt
• Internal PRO STOP cross bolt, no fragile external stop to break in a crash
• Compatible with the stock Domino throttle tube

Small Cam Set (white, grey, red): fuel injected bikes, or carbureted bikes wanting a near stock pull. Sits between the stock Domino black and white cams.

Large Cam Set (blue, yellow, black): carbureted bikes wanting a significantly faster turn, up to 50% less pull.

Linear cams speed up the pull at a constant rate, while progressive cams start slower and ramp up deeper into the throw, giving manageable power down low and a quicker spool up top. Measured rotation numbers for every cam are in the charts in the photo gallery.

Don't like a cam? Change it. A swap takes two minutes on the trail, so you can experiment and even switch between riding areas: faster for dry and grippy, slower for slippery.

Read the full cam guide with measured charts here.

Extra cam sets are available here.

Installation is quick with basic hand tools. Follow the full step by step video installation guide. Note** not compatible with Beta 4T. 

Cams snap on and off in seconds, so your setup can change as bikes, sections and confidence change. More guides live on our installation page.

Like everything we build, the Dream Throttle is covered by our 2 year crash warranty. Designed and tested in Squamish, British Columbia, by riders.