1 7

Brembo Enduro X-Light Clutch Lever V2

Brembo Enduro X-Light Clutch Lever V2

$165.00 CAD
$165.00 CAD
Sale Sold out
Brembo Clutch Lever (Color)
Adjuster
Flip Chip

One lever. Choose your lightness.

One clutch lever. You choose how light you want it to feel. Our patent pending flip-chip system lets you tune your clutch pull in minutes, then forget about it and ride.

One-finger pull · CNC 7075 aluminium · FIM competition approved · 2-year crash warranty

Choose your lightness
The flip chip physically changes the leverage ratio, so you set how light the pull feels. Light, X-Light, or Mid-Light. Your choice, not the factory's.
Simple setup
Swap the chip and dial the toolless adjuster trailside. Minutes, not mechanics. No new lever, no bench, no special tools.
No drag, no burnout
Tuned for 9 mm & 10 mm Brembo master cylinders and engineered to hold its feel when hot. No clutch drag on long climbs, no burnout when it counts.
2-year crash warranty
Hard enduro means hitting the deck. We cover crashes for 2 years, best in the industry, because we build it to survive the way you ride.
The design & feel

The best gear is the kind you forget is there. Our levers are engineered as a system, balancing leverage ratio, mechanical advantage, ergonomics and adjustability, for a lighter pull without losing control or connection to the bike.

The patented one-finger profile sits closer to the bar, bringing the engagement point inboard for greater precision, less fatigue and a crisp, responsive feel.

Flip-chip, tailor your feel

Each lever ships with the Green chip (2 positions): Light, crisp and snappy, slightly lighter than stock; X-Light, an ultra-light pull for maximum ease. Add the Red chip (+1 position) for a Mid-Light setting in between. Light feel. Fast response. Multiple settings. Tailored to your preference.

Progressive feel, engineered

We designed the leverage ratio to change through the stroke to match the strength of your fingers at every point.

At the start of the travel, where your fingers are weakest, the ratio is at its lightest so the lever breaks away with little effort. Through the middle, right where the clutch engages, the curve gives you the most sensitivity so you can feather and modulate with real precision. As you pull in toward the bar, where your fingers are strongest, the feel firms up slightly. That extra push moves more fluid and fully disengages the clutch, so you get a clean pull with little to no clutch drag.

Fitment, will it fit my bike?

Replaces the OEM clutch lever on Brembo hydraulic master cylinders.

Fits: KTM EXC/EXC-F/XC-W/SX/SX-F 250 to 500 (2016 to 2026) · Husqvarna TE/FE/TC/FC 250 to 501 (2014 to 2016, MX/XC 2022 to 2026, enduro 2025) · GasGas MC/EX 125 to 450 (2021 to 2023) & EX250F/EX350F (2024 to 2026) · Beta RR/RR-S/X-Trainer 125 to 480 (2013 to 2026) · Sherco SE-R/SEF-R 125 to 500 (2014 to 2026) · TM EN/MX/EN-F 125 to 530.

Use the Braktec version instead for: GasGas EC/EC-F enduro & 2024+ MC/EX, and 2022 to 2024 Husqvarna enduro. Magura-equipped bikes (KTM 125/150/200, 2018 to 2021 Husqvarna enduro, Rieju MR 300) are not supported yet.

Not sure? Check the stamp on your master cylinder, try our Shop by Bike finder, or message us your make, model and year and we will confirm before you order.

Installation & setup

Choose your lightness. Tune your pull. Ride dialed.

Two Wheel Solutions LTD

View full details